
Why Borewater Smells Metallic at Your Property
A glass of borewater can look perfectly clear, yet leave a sharp, metallic smell on your hands, in the shower or around the kitchen sink. When borewater smells metallic, it is usually a sign that naturally occurring minerals, changes in the water system or ageing plumbing are affecting its quality. The cause is often manageable, but the right fix depends on where the issue starts.
For homes, farms and commercial properties around Busselton and the South West, borewater is a practical and valuable water source. It can support gardens, stock, irrigation, toilets and, where appropriately treated, household water supply. A metallic odour should not be ignored, particularly if it is new, becoming stronger or accompanied by staining, poor taste or changes to water pressure.
Why borewater smells metallic
The most common cause is iron in the groundwater. Iron is a naturally occurring mineral found in many underground water sources. As water moves through soil and rock, it can pick up dissolved iron. Once that water is pumped to the surface and exposed to oxygen, the iron can oxidise. This may produce a metallic smell, a rusty taste and orange-brown staining in basins, toilets, shower screens and laundry fixtures.
Manganese can cause similar problems. It is another naturally occurring mineral that often appears alongside iron. Rather than reddish staining, manganese may leave dark brown or black marks on plumbing fixtures, washing or irrigation equipment. The water may also develop an earthy or metallic odour.
A metallic smell does not always mean the bore itself is the source. Corroding steel pipes, old galvanised fittings, a deteriorating pressure tank or metal components in a pump system can add metals to the water after it leaves the bore. If the smell is stronger at one tap than another, or only appears in hot water, the issue may be within the plumbing system rather than the groundwater.
Check whether the smell is coming from the bore or plumbing
A few simple observations can help narrow down the cause before arranging repairs or treatment. Start by filling a clean glass from the bore supply and taking it outside. If the water smells metallic immediately, the borewater itself is more likely to contain iron, manganese or other dissolved minerals. If the smell develops after the water sits for several minutes, oxidation may be bringing the mineral issue to the surface.
Next, compare water from different outlets. Check a cold tap close to where the water enters the property, then a tap further away. If only one outlet smells or tastes metallic, inspect that fixture, its flexible hoses and nearby pipework. If every cold tap is affected, the cause is more likely to be at the bore, pump, tank or main supply line.
Hot water deserves separate attention. Water that smells metallic only when hot may indicate corrosion inside the hot water system. Sediment build-up, a worn sacrificial anode or internal tank deterioration can contribute to unpleasant odours and discolouration. Gas, electric, solar and heat-pump systems all need the right type of inspection, so it is best not to dismantle components yourself.
Also look for visible clues. Rust-coloured marks, black staining, cloudy water, sediment in tap aerators and reduced flow can all point to mineral build-up or corrosion. These signs do not identify the exact contaminant, but they help a plumber or water treatment professional assess the system efficiently.
Is metallic-smelling borewater safe to use?
It depends on what is causing the smell and how the water is being used. Iron and manganese are common aesthetic issues at lower levels, meaning they affect smell, taste and staining more than they create an immediate health concern. However, you should not assume the water is suitable for drinking simply because it looks clear or because the metallic odour seems mild.
Borewater quality can change with rainfall, groundwater levels, nearby land use, a damaged bore cap or changes to pumping equipment. It may contain bacteria, high mineral levels, salts or other contaminants that have no obvious smell or colour. Water intended for drinking, food preparation, bathing young children or filling a household water tank should be tested by an appropriate water laboratory.
Testing is especially worthwhile if the property has recently changed hands, the bore has been unused for a period, flooding has occurred, the water quality has changed suddenly or there are vulnerable people using the supply. A test can identify which treatment method is appropriate and prevent money being spent on a filter that does not suit the water chemistry.
For irrigation, a metallic odour may be less concerning, but high iron can still block sprinkler heads, drip lines, solenoids and filters over time. On rural properties, that can turn into a maintenance issue across a large irrigation network. Regular cleaning and correctly sized filtration can protect the system, but treatment should match the actual water test results.
Treatment options depend on the water test
There is no single filter that fixes every borewater problem. A basic sediment filter can catch visible particles, but it will not reliably remove dissolved iron before it oxidises. Likewise, a carbon filter may improve taste and odour in some situations, but it is not a complete solution for mineral-heavy or microbiologically unsafe borewater.
Iron and manganese often require a staged treatment approach. This can include aeration or oxidation to change dissolved minerals into particles, followed by filtration to remove them. Some systems use specialised media filters that need regular backwashing. Others may require chemical dosing, depending on the mineral level, pH and flow rate needed at the property.
Where borewater is used inside the house, the system should be designed around actual demand. A small filter that works for a garden tap may not keep up with showers, toilets, laundry use and kitchen water during a busy household morning. Rural and commercial sites may also need higher-capacity equipment to support irrigation, amenities or staff facilities without a drop in pressure.
If corrosion is contributing to the metallic smell, replacing a section of old pipework or a faulty component may be more effective than installing filtration. This is why checking the whole water path matters: bore, pump, pressure tank, storage tank, filters, pipework and fixtures. Treating the symptom at the kitchen tap can leave the underlying problem untouched.
When to call a plumber
Arrange an inspection if the metallic smell appears suddenly, water is discoloured, pressure has dropped, fixtures are staining quickly or the issue is limited to hot water. A licensed plumber can assess the plumbing side of the system, including ageing pipes, leaking fittings, pressure tanks, pumps, valves and hot water equipment.
You should also seek prompt advice if borewater has entered a rainwater tank, a backflow issue is suspected or the supply is connected to drinking-water plumbing without suitable protection. Cross-connections can create health and compliance risks. Backflow prevention and correctly separated pipework are particularly important at commercial premises, rural properties and homes with multiple water sources.
For a new or worsening borewater issue, it is sensible to organise water testing alongside the plumbing inspection. The combination gives you a clearer picture: testing identifies what is in the water, while the system inspection identifies whether equipment or pipework is adding to the problem.
Preventing staining and recurring problems
Once the cause has been identified, routine maintenance makes a significant difference. Clean tap aerators and shower heads where mineral scale has collected, service pumps and pressure equipment as recommended, and keep the bore head protected from surface contamination. If a filtration system is installed, follow its replacement, regeneration or backwashing schedule rather than waiting for odours and staining to return.
It is also worth recording changes in the water. Note when the smell is strongest, whether it follows heavy rain, whether it occurs on hot or cold water, and what staining you can see. These details can help identify a seasonal groundwater change versus a developing plumbing fault.
Metallic-smelling borewater is rarely something to solve by guessing at a filter from the hardware aisle. A practical check of the plumbing system, followed by water testing where needed, gives you a safer and more cost-effective path forward. SmartFlow Plumbing & Gas can help South West property owners investigate the plumbing side of the issue and keep their water system working as it should.




Comments